DIY No-Sew Curtain Panels

 

 

DIY No-Sew Curtains

 

Supplies:

Instructions:

  • cut fabric to desired length (65in, 86in, 95in, 102in or 108in)
    • **TIP: I always hang my curtains from ceiling to floor, rather than top of the window frame to floor, to create the illusion of a taller ceiling.
    • 8ft ceiling = 96 inches = 2.67 yards of fabric
    • 9ft ceilings= 108 inches= 3 yards of fabric
  • iron ALL of the fabric to remove wrinkles
  • place an old towel under the edges of fabric so you don’t damage the carpet
  • place adhesive tape around the perimeter of the fabric about 1/2 in from the edges (leave room to fold over)
  • fold the fabric over the adhesive tape and place hot iron on top for 5-6 seconds and slowly work your way around the fabric until all sides are “hemmed”
  • clip the curtains to the rings
  • hang the curtains
  • DONE!! Easy Peasy

Also see how to make your very own DIY Curtain Rod out of PVC pipe, coat hooks, and cabinet knobs

3 thoughts on “DIY No-Sew Curtain Panels

Leave a Reply